APHBM2012SURKSYKC

2.0x1.25mm SMD CHIP LED LAMP Part Number: APHBM2012SURKSYKC PRELIMINARY SPEC HYPER RED SUPER BRIGHT YELLOW Description Features z2.0mmx1.25mm zBI SMT LED, 0.45mm MAX. THICKNESS. -COLOR, LOW POWER CONSUMPTION. zWIDE zIDEAL InGaAlP on GaAs substrate Light Emitting Diode. VIEWING ANGLE. The Super Bright Yellow device is made with DH InGaAlP FOR BACKLIGHT AND INDICATOR. (on GaAs substrate) light emitting diode chip. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The Hyper Red source color devices are made with DH SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 1 OF 6 ERP: 1203006427 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA Lens Type HYPER RED (InGaAlP) APHBM2012SURKSYKC Min. Typ. 70 200 50 150 WATER CLEAR SUPER BRIGHT YELLOW (InGaAlP) Viewing Angle [1] 2 θ 1/2 120° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Units Test Conditions 650 590 Max. nm IF=20mA λpeak Peak Wavelength Hyper Red Super Bright Yellow λD [1] Dominant Wavelength Hyper Red Super Bright Yellow 635 590 nm IF=20mA Δλ1/2 Spectral Line Half-width Hyper Red Super Bright Yellow 28 20 nm IF=20mA C Capacitance Hyper Red Super Bright Yellow 35 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Super Bright Yellow 1.95 2.0 2.5 2.5 V IF=20mA IR Reverse Current Hyper Red Super Bright Yellow 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Super Bright Yellow Units Power dissipation 75 75 mW DC Forward Current 30 30 mA Peak Forward Current [1] 185 175 mA 5 5 V Reverse Voltage Operating/storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 2 OF 6 ERP: 1203006427 APHBM2012SURKSYKC Hyper Red SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 3 OF 6 ERP: 1203006427 Super Bright Yellow SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 4 OF 6 ERP: 1203006427 APHBM2012SURKSYKC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 5 OF 6 ERP: 1203006427 PACKING & LABEL SPECIFICATIONS APHBM2012SURKSYKC SPEC NO: DDSAH1407 REV NO: V.1 DATE: JAN/16/2007 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: F.ZHANG PAGE: 6 OF 6 ERP: 1203006427