APHFT1612PBASURKVGAC

1.6X1.26mm SMD CHIP LED LAMP Part Number: APHFT1612PBASURKVGAC PRELIMINARY SPEC ATTENTION Blue Hyper Red Green OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 1.6x1.26mm SMT LED, 0.52mm THICKNESS. The Blue source color devices are made with InGaN z LOW POWER CONSUMPTION. on SiC Light Emitting Diode. z IDEAL FOR BACKLIGHT AND INDICATOR. The Hyper Red source color devices are made with DH z VARIOUS COLORS AND LENS TYPES AVAILABLE. InGaAlP on GaAs substrate Light Emitting Diode. z PACKAGE : 2000PCS / REEL. The Green source color devices are made with InGaN on z MOISTURE SENSITIVITY LEVEL : LEVEL 3. G-SiC Light Emitting Diode. z RoHS COMPLIANT. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1203005323 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 18 60 70 150 70 180 Blue (InGaN) APHFT1612PBASURKVGAC Hyper Red (InGaAlP) WATER CLEAR Green (InGaN) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue Hyper Red Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 650 520 nm IF=20mA Blue Hyper Red Green 470 635 525 nm IF=20mA Spectral Line Half-width Blue Hyper Red Green 21 28 35 nm IF=20mA C Capacitance Blue Hyper Red Green 100 35 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue Hyper Red Green 3.2 1.95 3.2 4 2.5 4 V IF=20mA IR Reverse Current Blue Hyper Red Green 10 10 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Hyper Red Green Units Power dissipation 120 75 120 mW DC Forward Current 30 30 30 mA Peak Forward Current [1] 100 185 100 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1203005323 APHFT1612PBASURKVGAC Blue SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1203005323 Hyper Red SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1203005323 Green SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1203005323 APHFT1612PBASURKVGAC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1203005323 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAG5710 REV NO: V.2 APPROVED: WYNEC CHECKED: Allen Liu APHFT1612PBASURKVGAC DATE: MAY/18/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1203005323