APHM1608YCT

1.6x0.8mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APHM1608YCT Yellow Features 1.6mmx0.8mm SMT LED, 0.45mm MAX. THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2.Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE4772 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAR/20/2008 DRAWN: D.M.Su PAGE: 1 OF 5 ERP: 1203003463 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APHM1608YCT Yellow (GaAsP/GaP) WATER CLEAR 2.6 Typ. 8 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 75 30 140 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAE4772 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAR/20/2008 DRAWN: D.M.Su PAGE: 2 OF 5 ERP: 1203003463 Yellow APHM1608YCT SPEC NO: DSAE4772 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAR/20/2008 DRAWN: D.M.Su PAGE: 3 OF 5 ERP: 1203003463 APHM1608YCT yali n Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) 數位簽署者：yalin DN：cn=yalin, o, ou, email=sjhou@cn. kingbright.com, c= 日期︰2008.03.20 15:37:49 +08'00' Tape Specifications (Units : mm) SPEC NO: DSAE4772 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAR/20/2008 DRAWN: D.M.Su PAGE: 4 OF 5 ERP: 1203003463 PACKING & LABEL SPECIFICATIONS APHM1608YCT SPEC NO: DSAE4772 APPROVED: WYNEC REV NO: V.7 CHECKED: Allen Liu DATE: MAR/20/2008 DRAWN: D.M.Su PAGE: 5 OF 5 ERP: 1203003463