APHS1005CGCK

1.0X0.5mm SMD CHIP LED LAMP APHS1005CGCK GREEN Features 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS. LOW POWER CONSUMPTION. W IDE VIEW ING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAB6148 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/14/2004 DRAWN: B.H.LI PAGE: 1 OF 4 ERP: 1203002469 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APHS1005CGCK GREEN (InGaAIP) WATER CLEAR 10 Typ. 40 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAB6148 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/14/2004 DRAWN: B.H.LI PAGE: 2 OF 4 ERP: 1203002469 Green APHS1005CGCK SPEC NO: DSAB6148 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/14/2004 DRAWN: B.H.LI PAGE: 3 OF 4 ERP: 1203002469 APHS1005CGCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB6148 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: MAR/14/2004 DRAWN: B.H.LI PAGE: 4 OF 4 ERP: 1203002469