APHS1005SURCK

1.0X0.5mm SMD CHIP LED LAMP APHS1005SURCK HYPER RED Features 1.0mmX0.5mm SMT LED, 0.5mm THICKNESS. LOW POWER CONSUMPTION. W IDE VIEW ING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. S PEC NO: DSAA8724 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/14/2005 DRAWN: B.H.LI PAGE: 1 OF 4 ERP: 1203001480 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APHS1005SURCK HYPER RED (InGaAlP) WATER CLEAR 50 Typ. 150 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 170 30 185 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAA8724 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/14/2005 DRAWN: B.H.LI PAGE: 2 OF 4 ERP: 1203001480 Hyper Red APHS1005SURCK S PEC NO: DSAA8724 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/14/2005 DRAWN: B.H.LI PAGE: 3 OF 4 ERP: 1203001480 APHS1005SURCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAA8724 APPROVED: J. Lu REV NO: V.7 CHECKED: Allen Liu DATE: MAR/14/2005 DRAWN: B.H.LI PAGE: 4 OF 4 ERP: 1203001480