APJA2107CGCK

2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP APJA2107CGCK GREEN Features 2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1033 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP: 1203001497 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APJA2107CGCK GREEN (InGaAIP) WATER CLEAR 18 Typ. 60 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1033 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP: 1203001497 Green APJA2107CGCK SPEC NO: DSAD1033 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP: 1203001497 APJA2107CGCK Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1033 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP: 1203001497 PACKING & LABEL SPECIFICATIONS APJA2107CGCK SPEC NO: DSAD1033 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP: 1203001497