APJA2107MGC

2.1x0.7 mm RIGHT ANGLE SMD CHIP LED LAMP APJA2107MGC MEGA GREEN Features 2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAD1032 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1203001508 Selection Guide Iv (mcd) @ 20mA Min. APJA2107MGC MEGA GREEN (InGaAlP) WATER CLEAR 36 Typ. 80 Viewing Angle 2 θ 1/2 120° Part No. Dice Lens Type Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 105 30 150 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAD1032 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1203001508 Mega Green APJA2107MGC S PEC NO: DSAD1032 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1203001508 APJA2107MGC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAD1032 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1203001508 PACKING & LABEL SPECIFICATIONS APJA2107MGC S PEC NO: DSAD1032 APPROVED: J. Lu REV NO: V.4 CHECKED: Allen Liu DATE: JUN/30/2005 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1203001508