APJA2107PBC-A

2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APJA2107PBC/A BLUE Features 2.1mmx0.7mm RIGHT ANGLE SMT LED, 1.3mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAG3309 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/12/2006 DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP:1203004175 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20 mA Min. APJA2107PBC/A BLUE (InGaN) WATER CLEAR 18 Typ. 60 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 468 470 21 100 3.3 3.8 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 114 30 100 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAG3309 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/12/2006 DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP:1203004175 Blue APJA2107PBC/A S PEC NO: DSAG3309 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/12/2006 DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP:1203004175 APJA2107PBC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) S PEC NO: DSAG3309 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/12/2006 DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP:1203004175 PACKING & LABEL SPECIFICATIONS APJA2107PBC/A S PEC NO: DSAG3309 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: JUN/12/2006 DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP:1203004175