APK3216MGCK

3.2X1.6mm SMD CHIP LED LAMP APK3216MGCK MEGA GREEN Features !3.2mmX1.6mm SMT LED, 1.1mm THICKNESS. !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS !PACKAGE Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. COLORS AND LENS TYPES AVAILABLE. :2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO:DSAD1150 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e L en s Ty p e Iv (m c d ) @ 20m A Min . APK3216MGCK MEGA GREEN ( InGaAlP ) WATER CLEAR 36 Ty p . 80 V i ew i n g An g l e 2θ1/2 90 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR Par am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current D ev i c e Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Ty p . 574 570 20 15 2.1 2.5 10 Max . Un it s nm nm nm pF V uA Tes t Co n d it io n s IF = 2 0 m A IF = 2 0 m A IF = 2 0 m A V F = 0 V; f = 1 M Hz IF = 2 0 m A VR = 5V Absolute Maximum Ratings at T)=25°C Par am et er Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Meg a Gr een 105 30 150 5 -40°C To +85°C Un it s mW mA mA V SPEC NO:DSAD1150 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 2 OF 4 Mega Green APK3216MGCK SPEC NO:DSAD1150 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 3 OF 4 APK3216MGCK SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO:DSAD1150 APPROVED:J.Lu REV NO: V.1 CHECKED:Allen Liu DATE:MAR/25/2003 DRAWN: L.ZHANG PAGE: 4 OF 4