APKA2810SEC

2.8X1.0mm RIGHT ANGLE SMD CHIP LED LAMP APKA2810SEC SUPER BRIGHT ORANGE Features 2.8mmX1.0mm RIGHT ANGLE SMT LED, 1.2mm THICKNESS. LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25( ± 0.01") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAD1128 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 1 OF 5 ERP:1204000235 Selection Guide Iv (mcd) @ 20mA Min. APKA2810SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 110 Typ. 300 Viewing Angle 2θ1/2 90° Part No. Dice Lens Type Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAD1128 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 2 OF 5 ERP:1204000235 Super Bright Orange APKA2810SEC S PEC NO: DSAD1128 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 3 OF 5 ERP:1204000235 APKA2810SEC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAD1128 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 4 OF 5 ERP:1204000235 PACKING & LABEL SPECIFICATIONS APKA2810SEC Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAD1128 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: JUL/02/2005 DRAWN: W.J.ZHU PAGE: 5 OF 5 ERP:1204000235