APKF3030SEEVGABE-F01

3.0mmx3.0mm FULL-COLOR SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION O BSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APKF3030SEEVGABE-F01 HYPER ORANGE GREEN BLUE Features ●LOW POWER CONSUMPTION. ●3.0mmx3.0mm SMT LED, 2.0mm(MAX.) THICKNESS. ●ONE ORANGE, ONE GREEN AND ONE BLUE CHIPS IN ONE PACKAGE. ●CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. ●PACKAGE : 1000PCS / REEL. ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. ●RoHS COMPLIANT. Description The Hyper Orange source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on G-SiC Light Emitting Diode. The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 1 OF 7 ERP: 1204000838 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. HYPER ORANGE(InGaAIP) APKF3030SEEVGABE-F01 GREEN (InGaN) BLUE (InGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 Typ. 400 250 120 180 WATER CLEAR 110 50 100° Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Typ. 630 520 465 621 525 470 20 35 25 25 100 110 2.0 3.2 3.7 2.5 4.0 4.3 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA Δλ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA V R = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Orange 75 30 195 Green 120 30 100 5 -40°C To +85°C Blue 129 30 160 Units mW mA mA V S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 2 OF 7 ERP: 1204000838 APKF3030SEEVGABE-F01 Hyper Orange S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 3 OF 7 ERP: 1204000838 Green S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 4 OF 7 ERP: 1204000838 Blue S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 5 OF 7 ERP: 1204000838 APKF3030SEEVGABE-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 6 OF 7 ERP: 1204000838 PACKING & LABEL SPECIFICATIONS APKF3030SEEVGABE-F01 S PEC NO: DSAG5762 APPROVED: J. Lu R EV NO: V.2 CHECKED: Allen Liu DATE: J UN/24/2006 DRAWN: Z.Z.YANG PAGE: 7 OF 7 ERP: 1204000838