APL3015PBC-Z-F01

3.0mmx1.5mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APL3015PBC/Z-F01 Blue Features 3.0mmx1.5mm SMT LED, 1.4mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3776 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JUN/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203006761 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APL3015PBC/Z-F01 Blue (InGaN) WATER CLEAR 480 Typ. 850 Viewing Angle [1] 2θ1/2 70 ° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Blue Blue Blue Blue Blue Blue Typ. 458 465 22 110 3.2 3.7 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 111 30 100 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH3776 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JUN/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203006761 Blue APL3015PBC/Z-F01 SPEC NO: DSAH3776 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JUN/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203006761 APL3015PBC/Z-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3776 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JUN/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203006761 PACKING & LABEL SPECIFICATIONS APL3015PBC/Z-F01 SPEC NO: DSAH3776 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: JUN/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203006761