APL3015YC-F01

3.0mmx1.5mm SMD CHIP LED LAMP APL3015YC-F01 YELLOW Features zLOW z3.0mmx1.5mm zWIDE Description SMT LED, 1.4mm THICKNESS. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. POWER CONSUMPTION. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. : 2000PCS / REEL. zIDEAL zVARIOUS zRoHS zPACKAGE COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAE8047 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP:1203001639 -01 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. APL3015YC-F01 YELLOW (GaAsP/GaP) WATER CLEAR 2.6 Typ. 10 Viewing Angle 2θ1/2 70° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Yellow 105 30 140 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAE8047 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP:1203001639 -01 Yellow APL3015YC-F01 S PEC NO: DSAE8047 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP:1203001639 -01 APL3015YC-F01 Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAE8047 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP:1203001639 -01