APS3227SP1C-P22

APS3227SP1C-P22 Ambient Light Photo Sensor DESCRIPTION  PACKAGE DIMENSIONS The APS3227SP1C-P22 is a NPN silicon phototransistor, It is a good effective solution to the power saving of display backlighting appliances and the device is sensitive to the visible spectrum FEATURES         Lead-free package Component in accordance with RoHS Adapted to human eye responsive Wide angle of half sensitivity Moisture sensitivity level: 3 Package: 2000 pcs / reel Water clear lens Halogen-free APPLICATIONS     Detection of ambient light to control display backlighting in: Mobile phones PDAs Note books Video cameras RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. ABSOLUTE MAXIMUM RATINGS at TA=25°C Parameter Symbol Value Unit Notice Collector Emitter Voltage Vceo 60 V Iceo = 100 μ A Emitter-Collector Voltage Veco 4 V Ieco = 100 μ A Operating Temperature Topr -40 to +85 °C - Storage Temperature Tstg -40 to +85 °C - Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. © 2022 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.7 Date: 04/23/2022 Page 1 / 3 APS3227SP1C-P22 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Value Symbol Min. Typ. Max. Unit Conditions Collector Emitter Breakdown Voltage BVceo 60 - - V Iceo = 100 μ A Emitter Collector Breakdown Voltage BVeco 4 - - V Ieco = 100 μ A ID - 10 100 nA VCE = 5V EV = 0Lx Light Current (1) IPH1 - 6 - μA VCE = 5V, Ev = 100 Lx [1] Light Current (2) IPH2 - 130 - μA VCE = 5V, Ev = 1000 Lx [1] Light Current (3) IPH3 - 950 - μA VCE = 5V, Ev = 1000 Lx [2] Light Current (4) IPH4 - 420 - μA VCE = 5V, Ev = 1000 Lx [3] Saturation Output Voltage Vo 4.5 4.7 - V VCC = 5V, EV = 1000Lx [1], RL = 75K Ω Response Wavelength λ 390 - 700 nm >10% Response VCE (sat) - - 0.4 V IC = 10 mA λ 0.1 390 - 950 nm - λp - 580 - nm - 2θ1/2 - 120 - deg - Collector dark current Collector Emitter Saturation Voltage Range of spectral bandwidth Wavelength of peak sensitivity Angle of half sensitivity Notes: 1. White Fluorescent light (Color Temperature = 6200K) is used as light source. 2. Illuminance by CIE standard illuminant-A/2856K,incandescet lamp. 3. Sunlight (Color Temperature = 4600K) is used as light source. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Fig.1 Illuminance vs. Fig.2 Relative Spectral Responsivity vs. W avelength Output current (µA) 10000 Ta = 25 °C,Vce = 5V 　 　 Flourescent Light 　 　 Incandescent Lamp 　 1000 100 10 1 1 10 100 1000 10000 Illuminance Ev (Lux) Relative spectral sensitivity (a. u.) Output Phtocurrent 100% 80% Ta = 25 °C 60% 40% 20% 0% 300 400 500 600 700 800 W avelength (nm) 900 1000 1100 CONVERTING PHOTOCURRENT TO VOLTAGE Notes: 1. The output voltage (Vout) is the product of photocurrent (IPH) and loading resistor (RL) 2. A right loading resistor shall be chosen to meet the requirement of maximum ambient light, and Output saturation voltage: Vout (max) = lout (max.) XRL ≤ Vout (saturation) = Vcc-0.3V © 2022 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.7 Date: 04/23/2022 Page 2 / 3 APS3227SP1C-P22 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes © 2022 Kingbright. All Rights Reserved. Spec No: DSAO8898 / 1207100002 Rev No: V.7 Date: 04/23/2022 Page 3 / 3