APS5130PD7C-P22

APS5130PD7C-P22 RGB Color Sensor DESCRIPTION PACKAGE DIMENSIONS The APS5130PD7C-P22 Color Sensor Device, consisting of 3-Channel/1Chip (R, G, B) Si photodiode is a good effective solution to color balance of display backlighting appliances FEATURES tia l Lead-free package Component in accordance with RoHS SMD style package on PCB technology Integral Color Filter in Blue, Green, or Red Package: 1500 pcs / reel Moisture sensitivity level: 3 RoHS Compliant on fid The devices are suitable for : Colorimetry Printing process control Display color correction en APPLICATIONS RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) C Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. ABSOLUTE MAXIMUM RATINGS at TA=25°C (UNLESS OTHERWISE SPECIFIED) Parameter Symbol Value Unit Reverse Voltage VR 10 V Operating Temperature Topr -40 to +85 °C Storage Temperature Tstg -40 to +85 °C Soldering Temperature Tsd 260 °C Note: 1. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033. © 2019 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.5 Date: 01/23/2019 Page 1 / 4 APS5130PD7C-P22 ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C (UNLESS OTHERWISE SPECIFIED) Value Symbol IL1 Parameter Condition 100Lux [1] VR = 5V Light Current (1) 1000Lux [1] VR = 5V Unit Min. Typ. Max. Red - 0.039 - Green - 0.042 - Blue - 0.022 - Red - 0.427 - Green - 0.498 - Blue µA IL2 Light Current (2) - 0.262 - D Diameter of the irradiation sensitive area - 2.0 - mm A Irradiation sensitive area per element - 0.85 - mm2 - 0.33 0.25 0.18 - A/W nA Photo sensibility of the single color areas λ R = 620 nm λ G = 550 nm λ B = 470 nm ID Reverse Dark Current VR = 5V - - 10 Red 570 - 670 Green 450 - 650 Blue 370 - 530 Red - 620 - Green - 550 - Blue - 470 - - 120 - Wavelength of peak sensitivity 2θ1/2 Angle of half sensitivity nm nm deg on fid λp Range of spectral bandwidth en λ 0.1 tia l SMax µA Notes: 1.White fluorescent light (Color Temperature = 6500K) is used as light source. 2. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Fig.1 Dark Current vs. Ambient Temperature 6.0 3.0 2.0 1.0 0.0 0 10 20 30 40 50 60 70 80 Ambient temperature (°C) Fig.3 Relative spectral sensitivity (a. u.) 4.0 C Dark current(nA) 5.0 Fig.2 Relative Spectral Responsivity vs. W avelength 100% Ta = 25 °C 80% R G 60% B 40% 20% 0% 350 400 -15° 0° -30° 550 600 650 15° 30° -45° 45° 60° -60° 75° -75° -90° 1.0 500 W avelength (nm) Relative Radiant Sensitivity vs. Angular Displacement Ta = 25 °C Relative sensitivity 450 0.5 0.0 © 2019 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.5 Date: 01/23/2019 0.5 90° 1.0 Page 2 / 4 APS5130PD7C-P22 TYPICAL ELECTRO - OPTICAL CHARACTERISTICS CURVES Fig.4 R,G,B LED Test vs. Output Photocurrent 7 Input Pow er=1mW/cm2 5 4 3 2 1 on fid Fig.5 R,G,B LED Test vs. Output Photocurrent GLED=520nmn FWHM=35nm BLED=461nmn FWHM=20nm en 0 RLED=626nmn FWHM=20nm tia l Oput Current(uA) 6 80 Oput Current(uA) 70 60 Input Pow er=10mW/cm2 50 40 30 20 C 10 0 RLED=626nmn FWHM=20nm GLED=520nmn FWHM=35nm © 2019 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.5 Date: 01/23/2019 BLED=461nmn FWHM=20nm Page 3 / 4 APS5130PD7C-P22 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS C on fid PACKING & LABEL SPECIFICATIONS en Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. tia l TAPE SPECIFICATIONS (units : mm) PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes © 2019 Kingbright. All Rights Reserved. Spec No: DSAO8899 / 1207100001 Rev No: V.5 Date: 01/23/2019 Page 4 / 4