APT1608CGCK

1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608CGCK Green Features 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Green source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA6059 APPROVED: WYNEC REV NO: V.10 CHECKED: Allen Liu DATE: JUN/01/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203005329 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT1608CGCK Green (InGaAlP) WATER CLEAR 10 Typ. 40 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 574 570 20 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 75 30 150 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAA6059 APPROVED: WYNEC REV NO: V.10 CHECKED: Allen Liu DATE: JUN/01/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203005329 Green APT1608CGCK SPEC NO: DSAA6059 APPROVED: WYNEC REV NO: V.10 CHECKED: Allen Liu DATE: JUN/01/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203005329 APT1608CGCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAA6059 APPROVED: WYNEC REV NO: V.10 CHECKED: Allen Liu DATE: JUN/01/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203005329 PACKING & LABEL SPECIFICATIONS APT1608CGCK SPEC NO: DSAA6059 APPROVED: WYNEC REV NO: V.10 CHECKED: Allen Liu DATE: JUN/01/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203005329