APT1608MGC_07

1.6X0.8mm SMD CHIP LED LAMP Part Number: APT1608MGC MEGA GREEN Features 1.6mmX0.8mm SMT LED, 0.75mm THICKNESS. LOW POWER CONSUMPTION. W IDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Mega Green source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. P ackage Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA9053 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: S.J.LIU PAGE: 1 OF 5 ERP: 1203005344 S election Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT1608MGC MEGA GREEN (InGaAlP) WATER CLEAR 18 Typ. 70 Viewing Angle [1] 2 θ 1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Mega Green Mega Green Mega Green Mega Green Mega Green Mega Green Typ. 574 568 26 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Mega Green 75 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA9053 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: S.J.LIU PAGE: 2 OF 5 ERP: 1203005344 Mega Green APT1608MGC SPEC NO: DSAA9053 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: S.J.LIU PAGE: 3 OF 5 ERP: 1203005344 APT1608MGC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAA9053 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: S.J.LIU PAGE: 4 OF 5 ERP: 1203005344 PACKING & LABEL SPECIFICATIONS APT1608MGC SPEC NO: DSAA9053 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: APR/18/2007 DRAWN: S.J.LIU PAGE: 5 OF 5 ERP: 1203005344