APT1608SYCK

1.6X0.8mm SMD CHIP LED LAMP P/N: APT1608SYCK SUPER BRIGHT YELLOW Features zLOW z1.6mmX0.8mm zW IDE Description SMT LED, 0.75mm THICKNESS. The Super Bright Yellow source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. POWER CONSUMPTION. VIEW ING ANGLE. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. 2000PCS / REEL . SENSITIVITY LEVEL : LEVEL 3. zIDEAL zVARIOUS zPACKAGE: zRoHS zMOISTURE COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD0931 APPROVED: J. Lu REV NO:V.6 CHECKED: Allen Liu DATE: MAR/25/2006 DRAWN: Z.Z.YANG PAGE: 1 OF 5 ERP:1203005332 Selection Guid e Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT1608SYCK SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 18 Typ. 120 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] ∆λ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 590 20 20 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 125 30 175 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0931 APPROVED: J. Lu REV NO:V.6 CHECKED: Allen Liu DATE: MAR/25/2006 DRAWN: Z.Z.YANG PAGE: 2 OF 5 ERP:1203005332 Super Bright Yellow APT1608SYCK SPEC NO: DSAD0931 APPROVED: J. Lu REV NO:V.6 CHECKED: Allen Liu DATE: MAR/25/2006 DRAWN: Z.Z.YANG PAGE: 3 OF 5 ERP:1203005332 APT1608SYCK Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) SPEC NO: DSAD0931 APPROVED: J. Lu REV NO:V.6 CHECKED: Allen Liu DATE: MAR/25/2006 DRAWN: Z.Z.YANG PAGE: 4 OF 5 ERP:1203005332 PACKING & LABEL SPECIFICATIONS APT1608SYCK SPEC NO: DSAD0931 APPROVED: J. Lu REV NO:V.6 CHECKED: Allen Liu DATE: MAR/25/2006 DRAWN: Z.Z.YANG PAGE: 5 OF 5 ERP:1203005332