APT2012PBC/A

2.0x1.25mm SMD CHIP LED LAMP Part Number: APT2012PBC/A Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z2.0mm x1.25mm SMT LED,0.75mm thickness. The Blue source color devices are made with InGaN zLow power consumption. on SiC Light Emitting Diode. zWide viewing angle. Static electricity and surge damage the LEDS. zIdeal for backlight and indicator. It is recommended to use a wrist band or anti-electrostatic zVarious colors and lens types available. glove when handling the LEDs. zPackage : 2000pcs / reel. All devices, equipment and machinery must be electrically zMoisture sensitivity level : level 3. grounded. zRoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAE5168 REV NO: V.8 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/24/2009 DRAWN: X.J.Guo PAGE: 1 OF 5 ERP: 1203003730 Selection Guide Part No. Dice APT2012PBC/A Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 18 60 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAE5168 REV NO: V.8 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/24/2009 DRAWN: X.J.Guo PAGE: 2 OF 5 ERP: 1203003730 Blue APT2012PBC/A SPEC NO: DSAE5168 REV NO: V.8 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/24/2009 DRAWN: X.J.Guo PAGE: 3 OF 5 ERP: 1203003730 APT2012PBC/A Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) SPEC NO: DSAE5168 REV NO: V.8 APPROVED: WYNEC CHECKED: Allen Liu DATE: MAR/24/2009 DRAWN: X.J.Guo PAGE: 4 OF 5 ERP: 1203003730 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAE5168 REV NO: V.8 APPROVED: WYNEC CHECKED: Allen Liu APT2012PBC/A DATE: MAR/24/2009 DRAWN: X.J.Guo PAGE: 5 OF 5 ERP: 1203003730