APT2012QBC-D

2.0x1.25mm SMD CHIP LED LAMP Part Number: APT2012QBC/D Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features 2.0mmx1.25mm SMT LED,0.75mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Blue source color devices are made with AlInGaN on Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH0446 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: APR/28/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203001847 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT2012QBC/D Blue (AlInGaN) WATER CLEAR 50 Typ. 100 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Blue Blue Blue Blue Blue Blue Typ. 468 470 25 100 3.3 4 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 120 30 150 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAH0446 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: APR/28/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203001847 Blue APT2012QBC/D SPEC NO: DSAH0446 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: APR/28/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203001847 APT2012QBC/D Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH0446 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: APR/28/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203001847 PACKING & LABEL SPECIFICATIONS APT2012QBC/D SPEC NO: DSAH0446 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: APR/28/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203001847