APT3216SECK

3.2mmx1.6mm SMD CHIP LED LAMP Part Number: APT3216SECK Super Bright Orange Features 3.2mmx1.6mm SMT LED, 0.75mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD0991 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203001965 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT3216SECK Super Bright Orange (InGaAlP) WATER CLEAR 50 Typ. 160 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 15 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAD0991 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203001965 Super Bright Orange APT3216SECK SPEC NO: DSAD0991 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203001965 APT3216SECK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD0991 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203001965 PACKING & LABEL SPECIFICATIONS APT3216SECK SPEC NO: DSAD0991 APPROVED: WYNEC REV NO: V.6 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203001965