APT3216WG1C

3.2mmx1.6mm SMD CHIP LED LAMP Part Number: APT3216WG1C Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features 3.2mmx1.6mm SMT LED, 0.75mm thickness. Low power consumption. Wide viewing angle. Ideal for backlight and indicator. Various colors and lens types available. Package : 2000pcs / reel. Moisture sensitivity level : level 3. RoHS compliant. Description The Green source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAL5942 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 1 OF 5 ERP: 1203011533 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APT3216WG1C Green (InGaN) Water Clear 120 Typ. 300 Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Green Green Green Green Green Green Typ. 500 505 28 45 3.2 3.8 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Green 95 25 150 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAL5942 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 2 OF 5 ERP: 1203011533 Green APT3216WG1C SPEC NO: DSAL5942 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 3 OF 5 ERP: 1203011533 APT3216WG1C Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAL5942 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 4 OF 5 ERP: 1203011533 PACKING & LABEL SPECIFICATIONS APT3216WG1C SPEC NO: DSAL5942 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: FEB/09/2011 DRAWN: Y.F.Lv PAGE: 5 OF 5 ERP: 1203011533