APTB1612ESGC-F01

1.6X1.25mm BI-COLOR SMD CHIP LED LAMP Part Number: APTB1612ESGC-F01 High Efficiency Red Super Bright Green Features 1.6mmx1.25mm SMT LED, 0.65mm THICKNESS. BI-COLOR,LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1203002009 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APTB1612ESGC-F01 High Efficiency Red (GaAsP/GaP) Super Bright Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 120° Typ. 12 12 WATER CLEAR 4 4 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green High Efficiency Red Super Bright Green Typ. 627 565 625 568 45 30 15 15 2 2.2 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. High Efficiency Red 75 30 160 5 Super Bright Green 62.5 25 140 Units mW mA mA V -40°C To +85°C -40°C To +85°C SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1203002009 APTB1612ESGC-F01 High Efficiency Red SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1203002009 Super Bright Green SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1203002009 APTB1612ESGC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1203002009 PACKING & LABEL SPECIFICATIONS APTB1612ESGC-F01 SPEC NO: DSAF1097 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/07/2007 DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1203002009