APTC2012SGC

2.0x1.25mm SMD CHIP LED LAMP APTC2012SGC SUPER BRIGHT GREEN Features !2.0mmx1.25mm SMT LED,0.75mm THICKNESS. !LOW Description The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. POWER CONSUMPTION. VIEWING ANGLE. COLORS AND LENS TYPES AVAILABLE. : 2000PCS / REEL. ! WIDE !IDEAL FOR BACKLIGHT AND INDICATOR. ! VARIOUS !PACKAGE Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. S PEC NO: DSAB6365 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide Par t No . Dic e L en s Ty p e Iv (m c d ) @ 20 m A Min . APTC2012SGC SUPER BRIGHT GREEN (GaP) WATER CLEAR 4 Ty p . 15 V i ew i n g An g l e 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR Par am et er Peak Wavelength Dominate Wavelength D ev i c e Super Bright Green Super Bright Green Ty p . 565 568 30 15 2.2 2.5 10 Max . Un it s nm nm nm pF V uA Tes t Co n d it io n s I F =20mA I F =20mA I F =20mA VF=0V;f=1MHz I F =20mA V R = 5V Spectral Line Half-width Super Bright Green Capacitance Forward Voltage Reverse Current Super Bright Green Super Bright Green Super Bright Green Absolute Maximum Ratings at T)=25°C P ar am e t e r Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Su p er B r ig h t Gr een 105 25 140 5 -40°C To +85°C Un it s mW mA mA V S PEC NO: DSAB6365 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 2 OF 4 Super Bright Green APTC2012SGC S PEC NO: DSAB6365 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 3 OF 4 APTC2012SGC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAB6365 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: MAR/22/2003 DRAWN:S.J.HOU PAGE: 4 OF 4