APTD3216SEC

3.2x1.6mm SMD CHIP LED LAMP APTD3216SEC SUPER BRIGHT ORANGE Features z3.2mmx1.6mm zLOW zWIDE Description SMT LED,1.8mm THICKNESS. The Super Bright Orange device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip . POWER CONSUMPTION. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. : 2000PCS / REEL. zIDEAL zRoHS zPACKAGE COMPLIANT. Package Dimension s Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA7055 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 1 OF 4 ERP: 1203002270 Selection Guid e Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APTD3216SEC SUPER BRIGHT ORANGE (InGaAlP) WATER CLEAR 380 Typ. 1200 Viewing Angle 2θ1/2 50° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Super Bright Orange Typ. 610 601 29 30 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Orange 75 30 195 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAA7055 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 2 OF 4 ERP: 1203002270 Super Bright Orange APTD3216SEC SPEC NO: DSAA7055 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 3 OF 4 ERP: 1203002270 APTD3216SEC Recommended Soldering Pattern (Units : mm ) Tape Specifications (Units : mm ) If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAA7055 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: MAR/15/2005 DRAWN: S.H.CHEN PAGE: 4 OF 4 ERP: 1203002270