APTD3216SYC

3.2x1.6mm SMD CHIP LED LAMP P/N: APTD3216SYC SUPER BRIGHT YELLOW Features 3.2mmX1.6mm SMT LED, 1.8mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. MOISTURE SENSITIVITY LEVEL : LEVEL 3. PACKAGE: 2000PCS / REEL . RoHS COMPLIANT. Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1049 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/29/2006 DRAWN: H.Q.YUAN PAGE: 1 OF 5 ERP:1203002308 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APTD3216SYC SUPER BRIGHT YELLOW (InGaAIP) WATER CLEAR 110 Typ. 300 Viewing Angle [1] 2θ1/2 50° Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD[1] ∆λ1/2 C VF[2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 588 28 25 2.0 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 75 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1049 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/29/2006 DRAWN: H.Q.YUAN PAGE: 2 OF 5 ERP:1203002308 Super Bright Yellow APTD3216SYC SPEC NO: DSAD1049 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/29/2006 DRAWN: H.Q.YUAN PAGE: 3 OF 5 ERP:1203002308 APTD3216SYC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Note: Tolerance is ±0.25 unless otherwise noted. SPEC NO: DSAD1049 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/29/2006 DRAWN: H.Q.YUAN PAGE: 4 OF 5 ERP:1203002308 PACKING & LABEL SPECIFICATIONS APTD3216SYC SPEC NO: DSAD1049 APPROVED: J. Lu REV NO: V.6 CHECKED: Allen Liu DATE: APR/29/2006 DRAWN: H.Q.YUAN PAGE: 5 OF 5 ERP:1203002308