APTD3216SYCK

3.2x1.6mm SMD CHIP LED LAMP Part Number: APTD3216SYCK Super Bright Yellow Features 3.2mmX1.6mm SMT LED, 1.8mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE: 2000PCS / REEL . MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Super Bright Yellow device is made with DH InGaAlP (on GaAs substrate) light emitting diode chip. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1050 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203002312 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APTD3216SYCK Super Bright Yellow (InGaAlP) WATER CLEAR 70 Typ. 250 Viewing Angle [1] 2θ1/2 50° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Super Bright Yellow Typ. 590 590 20 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Yellow 75 30 175 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1050 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203002312 Super Bright Yellow APTD3216SYCK SPEC NO: DSAD1050 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203002312 APTD3216SYCK Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1050 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203002312 PACKING & LABEL SPECIFICATIONS APTD3216SYCK SPEC NO: DSAD1050 APPROVED: WYNEC REV NO: V.8 CHECKED: Allen Liu DATE: MAY/10/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203002312