APTF1616SEEVGAPBAC

1.6x1.6mm FULL-COLOR SURFACE MOUNT LED PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APTF1616SEEVGAPBAC Hyper Orange Green Blue Features 1.6mmX1.6mm SMT LED, 0.7mm THICKNESS LOW POWER CONSUMPTION ONE BLUE, ONE RED AND ONE GREEN CHIPS IN ONE PACKAGE CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 3. RoHS COMPLIANT. Description The Hyper Orange source color devices are made with InGaAlP on GaAs substrate Light Emitting Diode. The Green source color devices are made with InGaN on GSiC Light Emitting Diode. The Blue source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 1 OF 7 ERP: 1203007428 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. Hyper Orange (InGaAlP) APTF1616SEEVGAPBAC Green (InGaN) Blue (InGaN) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 Typ. 400 180 40 180 WATER CLEAR 70 10 120° Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Peak Wavelength Device Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Hyper Orange Green Blue Typ. 630 520 468 621 525 470 20 35 21 25 100 100 2 3.2 3.2 2.5 4 4 10 10 10 Max. Units nm Test Conditions IF=20mA λD [1] Dominant Wavelength nm IF=20mA Δλ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF [2] Forward Voltage V IF=20mA IR Reverse Current uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Orange 75 30 195 Green 120 30 100 5 -40°C To +85°C -40°C To +85°C Blue 120 30 100 Units mW mA mA V SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 2 OF 7 ERP: 1203007428 APTF1616SEEVGAPBAC Hyper Orange SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 3 OF 7 ERP: 1203007428 Green SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 4 OF 7 ERP: 1203007428 Blue SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 5 OF 7 ERP: 1203007428 APTF1616SEEVGAPBAC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: NOV/06/2007 DRAWN: C.WANG PAGE: 6 OF 7 ERP: 1203007428 PACKING & LABEL SPECIFICATIONS APTF1616SEEVGAPBAC SPEC NO: DSAH8850 APPROVED: WYNEC REV NO: V.1 assessor CHECKED: Allen Liu 數位簽署者：assessor DN：cn=assessor, o, ou, email=assessor@cn. DATE:kingbright.com, c= NOV/06/2007 日期︰2007.11.07 DRAWN: C.WANG 14:22:40 +08'00' PAGE: 7 OF 7 ERP: 1203007428