APTF3216SEEZGQBDC

3.2mm x 1.6mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: APTF3216SEEZGQBDC ATTENTION Hyper Red Green Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED, 0.75mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Can produce any color in visible spectrum, including The Green source color devices are made with InGaN white light. on Sapphire Light Emitting Diode. z Package : 2000pcs / reel. The Blue source color devices are made with InGaN Light z Moisture sensitivity level : level 3. Emitting Diode. z RoHS compliant. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 200 400 200 350 55 80 Hyper Red (AlGaInP) APTF3216SEEZGQBDC Green (InGaN) Water Clear Blue (InGaN) Viewing Angle [1] 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red Green Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 630 515 468 nm IF=20mA Hyper Red Green Blue 621 525 470 nm IF=20mA Spectral Line Half-width Hyper Red Green Blue 20 30 25 nm IF=20mA C Capacitance Hyper Red Green Blue 25 45 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Red Green Blue 2 3.3 3.3 2.5 4.1 4 V IF=20mA IR Reverse Current Hyper Red Green Blue 10 50 50 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Green Blue Units Power dissipation 75 102.5 120 mW DC Forward Current 30 25 30 mA Peak Forward Current [1] 195 150 150 mA Reverse Voltage 5 Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C V Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 APTF3216SEEZGQBDC Hyper Red SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 3 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 Green SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 Blue SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 APTF3216SEEZGQBDC Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Reel Dimension Tape Dimensions (Units : mm) SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223 PACKING & LABEL SPECIFICATIONS APTF3216SEEZGQBDC SPEC NO: DSAJ8755 REV NO: V.3 DATE: APR/20/2011 PAGE: 7 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1203010223