APTK2012SURCK-F01

2.0x1.25mm SMD CHIP LED LAMP Part Number: APTK2012SURCK-F01 Hyper Red Features 2.0mmx1.25mm SMT LED, 0.75mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAF1347 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/08/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1204000331 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. APTK2012SURCK-F01 Hyper Red (InGaAlP) WATER CLEAR 70 Typ. 200 Viewing Angle [1] 2θ1/2 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Typ. 650 635 28 35 1.95 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Hyper Red 75 30 185 5 -40°C To +85°C -40°C To +85°C Units mW mA mA V SPEC NO: DSAF1347 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/08/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1204000331 Hyper Red APTK2012SURCK-F01 SPEC NO: DSAF1347 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/08/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1204000331 APTK2012SURCK-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAF1347 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/08/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1204000331 PACKING & LABEL SPECIFICATIONS APTK2012SURCK-F01 SPEC NO: DSAF1347 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/08/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1204000331