APTR3216MBC

3.2x1.6mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES APTR3216MBC BLUE Features 3.2mmx1.6mm SMT LED,1.05mm THICKNESS. LOW POWER CONSUMPTION. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VAVRIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Description The Blue source color devices are made with GaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAD1013 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 ERP: 1203002370 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. APTR3216MBC BLUE (GaN) WATER CLEAR 4 Typ. 10 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Blue Blue Blue Blue Blue Blue Device Typ. 430 466 60 100 3.8 4.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 105 30 150 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAD1013 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 ERP: 1203002370 Blue APTR3216MBC SPEC NO: DSAD1013 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 ERP: 1203002370 APTR3216MBC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength),the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAD1013 APPROVED: J. Lu REV NO: V.2 CHECKED: Allen Liu DATE: MAR/11/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4 ERP: 1203002370