BLS101SURC-E-6V

10mm SCREW BASED LED LAMP BLS101SURC/E-6V HYPER RED Features ! BUILT-IN Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. CURRENT LIMITING RESISTOR FOR DIRECT APPLICATION OF DIFFERENT ACROSS CURRENT. ! LONG ! LOW ! LOW LIFE. CURRENT, POWER SAVINGS. MAINTENANCE. COLOR AVAILABLE. STATE, HIGH VIBRATION RESISTANT. ! DIFFERENT ! SOLID ! 6 V INTERNAL RESISTOR. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB2235 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:APR/14/2003 DRAWN: S.J.HOU PAGE: 1 OF 3 Selection Guide Par t No . Dic e L en s Ty p e Min . BLS101SURC/E-6V HYPER RED (InGaAlP) WATER CLEAR 900 Iv (m c d ) V=6V Ty p . 220 0 V i ew i n g An g l e 2θ1/2 20 ° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°C Sy m b o l λpeak D ∆λ1/2 IF IR Par am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Forward Current Reverse Current D ev i c e Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Ty p . 640 6 30 25 26 10 Max . Un it s nm nm nm mA uA Tes t Co n d it io n s VF=6V VF=6V VF=6V VF=6V V R = 5V Absolute Maximum Ratings at T)=25°C Par am et er Power dissipation for 6V DC Forward Voltage for 6V Reverse Voltage Operating Temperature Storage Temperature H y p e r R ed 160 7 5 -40°C To +70°C -40°C To +85°C Un it s mW V V SPEC NO: DSAB2235 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:APR/14/2003 DRAWN: S.J.HOU PAGE: 2 OF 3 Hyper Red BLS101SURC/E-6V SPEC NO: DSAB2235 APPROVED: J.LU REV NO: V.2 CHECKED: Allen Liu DATE:APR/14/2003 DRAWN: S.J.HOU PAGE: 3 OF 3