DC-10EGWA

10 SEGMENT BAR GRAPH ARRAY Part Number: DC-10EGWA High Efficiency Red Green Features Description z Suitable for level indicators. The High Efficiency Red source color devices are made with z Low current operation. Gallium Arsenide Phosphide on Gallium Phosphide Orange z Excellent on/off contrast. Light Emitting Diode. z End stackable. The Green source color devices are made with Gallium z Mechanically rugged. Phosphide Green Light Emitting Diode. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 1 OF 7 ERP: 1331000006 Selection Guide Part No. Dice Iv (ucd) [1] @ 10mA Lens Type Min. Typ. 3600 9000 *900 *2000 5600 12000 *1400 *2800 High Efficiency Red (GaAsP/GaP) DC-10EGWA White Diffused Green (GaP) Description 10 Segments Bar graph-Display Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red Green 627 565 λD [1] Dominant Wavelength High Efficiency Red Green 625 568 Δλ1/2 Spectral Line Half-width High Efficiency Red Green C Capacitance VF [2] IR Max. Units Test Conditions *627 *565 nm IF=20mA *617 *568 nm IF=20mA 45 30 nm IF=20mA High Efficiency Red Green 15 15 pF VF=0V;f=1MHz Forward Voltage High Efficiency Red Green 2 2.2 2.5 2.5 V IF=20mA Reverse Current High Efficiency Red Green 10 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. *Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current [1] 160 140 mA Reverse Voltage 5 Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] V 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 2 OF 7 ERP: 1331000006 DC-10EGWA High Efficiency Red SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 3 OF 7 ERP: 1331000006 Green SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 4 OF 7 ERP: 1331000006 PACKING & LABEL SPECIFICATIONS DC-10EGWA SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 5 OF 7 ERP: 1331000006 SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 6 OF 7 ERP: 1331000006 SPEC NO: DSAB0566 REV NO: V.8A DATE: JAN/20/2012 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: F.ZHANG PAGE: 7 OF 7 ERP: 1331000006