KM-23ID

Kingbright Features lSOT-23 ® SOT-23 SURFACE MOUNT LED LAMPS KM-23 Description The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. PACKAGE SURFACE MOUNT LED LAMP. lLOW POWER CONSUMPTION. lBOTH SINGLE CHIP AND TWO CHIPS VERSION ARE AVAILABLE. lLONG LIFE - SOLID STATE RELIABILITY. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. 1 -KM-23-1 Selection Guide Part No. KM-23HD KM-23HT KM-23HC KM-23ID KM-23IT KM-23EC KM-23YD KM-23YT KM-23YC KM-23SGD KM-23SGT KM-23SGC KM-23SYD KM-23SYT KM-23SYC KM-23SRD KM-23SRT KM-23SRC KM-23ESGW Dice Lens Type RED DIFFUSED RED TRANSPARENT WATER CLEAR RED DIFFUSED RED TRANSPARENT WATER CLEAR YELLOW DIFFUSED YELLOW TRANSPARENT WATER CLEAR GREEN DIFFUSED GREEN TRANSPARENT WATER CLEAR YELLOW DIFFUSED YELLOW TRANSPARENT WATER CLEAR RED DIFFUSED RED TRANSPARENT WATER CLEAR WHITE DIFFUSED Iv (mcd) @ 20 mA Min. BRIGHT RED (GaP) 0.5 0.5 0.5 8 8 8 5 5 5 8 8 8 40 40 40 50 50 50 8 8 WATER CLEAR 8 8 Max. 1.25 1.25 1.25 32 32 32 12.5 12.5 12.5 32 32 32 100 100 100 90 90 90 32 32 32 32 140° Viewing Angle 2q1/2 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° 140° HIGH EFFICIENCY RED (GaAsP/GaP) YELLOW (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT YELLOW (InGaAlP) SUPER BRIGHT RED (GaAlAs) HIGH EFFICIENCY RED (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) SUPER BRIGHT GREEN (GaP) KM-23ESGC Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T A=25°C Symbol Parameter Device Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green Super Bright Yellow Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green Super Bright Yellow Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green Super Bright Yellow Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green Super Bright Yellow All Typ. 700 625 590 660 565 595 45 45 35 20 30 20 40 12 10 95 45 33 2.0 2.0 2.1 1.85 2.2 2.0 10 Max. Units Test Conditions λpeak Peak Wavelength nm IF=20mA ∆λ1/2 Spectral Line Halfwidth nm IF=20mA C Capacitance pF VF=0V;f=1MHz vF IR Forward Voltage 2.5 2.5 2.5 2.5 2.5 2.4 V IF=20mA Reverse Current uA VR = 5V 1 -KM-23-2 Absolute Maximum Ratings at T A=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width . Bright Red 105 25 150 5 High Efficiency Red 105 30 150 5 Yellow 105 30 150 5 Super Bright Red 100 30 150 5 -40 ° C To +85 ° C Super Bright Green 105 25 150 5 Super Bright Yellow 125 30 150 5 Units mW mA mA V Bright Red KM-23HD, KM23HT, KM-23HC 1 -KM-23-3 High Efficiency Red KM-23ID, KM23IT, KM-23EC Yellow KM-23YD, KM23YT, KM-23YC 1 -KM-23-4 Super Bright Green KM-23SGD, KM-23SGT, KM-23SGC Super Bright Red KM-23SRD, KM-23SRT, KM-23SRC 1 -KM-23-5 Super Bright Yellow KM-23SYD, KM-23SYT, KM-23SYC High Efficiency Red / Super Bright Green KM-23ESGW, KM-23ESGC 1 -KM-23-6 KM-23 Series SMT Reflow Soldering Instructions KM-23 Series Recommended Soldering Pattern 1 -KM-23-7 KM-23 Series Tape Specifications (Units : mm) KM-23xxx KM-23ESGx 1 -KM-23-8