KP-1608P1C

PHOTOTRANSISTOR KP-1608P1C WATER CLEAR LENS Features ! MECHANICALLY Description AND SPECTRALLY MATCHED TO Made with NPN silicon phototransistor chips. THE KP-1608 SERIES INFRARED EMITTING LED LAMP. ! WATER CLEAR LENS. :2000PCS/REEL. ! PACKAGE Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subject to change without notice. SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 1 OF 3 Absolute Maximum Rating at T)=25°C Par ameter Collector-to-Emitter Breakdown Voltage Emitter-to-Collector Breakdown Voltage Power Dissipation at (or below) 25°C Free Air Temperature Operating Temperature Range Storage Temperature Range Max . Ratin g s 30V 5V 100mW -40°C ~ +85°C -40°C ~ +85°C Electrical And Radiant Characteristics at T)=25°C Sy m b o l V BR C EO V BR EC O VCE (SAT) ICEO TR TF Par ameter Collector-to-Emitter Breakdown Voltage Emitter-to-Collector Breakdown Voltage Collector-to-Emitter Saturation Voltage Collector Dark Current Rise Time (10% to 90%) Fall Time (90% to 10%) Min . 30 5 Ty p . 3 3 Max . 0.8 100 Un i t V V V nA us us Tes t Co n d ic tio n I C=100uA, Ee=0mW/cm2 I E=100uA, Ee=0mW/cm2 I C=2mA, Ee=20mW/cm2 VCE=10V, Ee=0mW/cm2 VCE=5V, IC=1mA, RL=1000Ω I (ON) On State Collector Current 0.1 0.3 - mA VCE=5V, Ee=1mW/cm2, λ=940nm SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 2 OF 3 KP-1608P1C SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0532 APPROVED:J.LU REV NO: V.1 CHECKED: DATE: SEP/17/2001 DRAWN:X.Q.ZHENG PAGE: 3 OF 3