KP-2012SURC

2.0x1.25mm SMD CHIP LED LAMP KP-2012SURC Features HYPER RED Description 2.0mmx1.25mm SMT LED,1.1mm THICKNESS. The Hyper Red source color devices are made LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light Emitting Diode. WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAB0861 REV NO: V.5 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 1 OF 4 Selection Guide Part No. Dice Lens Type KP-2012SURC HYPER RED (InGaAlP) WATER CLEAR Iv (mcd) @ 20mA Viewing Angle Min. Typ. 2 θ 1/2 70 200 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Hyper Red λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 640 nm IF=20mA Hyper Red 628 nm IF=20mA Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.9 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 170 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0861 REV NO: V.5 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 2 OF 4 Hyper Red KP-2012SURC SPEC NO: DSAB0861 REV NO: V.5 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 3 OF 4 KP-2012SURC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAB0861 REV NO: V.5 DATE: MAR/16/2005 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG PAGE: 4 OF 4