KPJA-2107SURCK

2.1x0.7mm RIGHT ANGLE SMD CHIP LED LAMP Part Number: KPJA-2107SURCK Hyper Red Features Description z 2.1x0.7mm right angle SMT LED, 1.3mm thickness. The Hyper Red source color devices are made with Al- z Low power consumption. GaInP on GaAs substrate Light Emitting Diode. z Wide viewing angle. z Ideal for backlight and indicator. z Various colors and lens types available. z Package : 2000pcs / reel. z Moisture sensitivity level : level 3. z Tinned pads for improved solderability. z RoHS compliant. Package Dimensions K g in g i r b t h Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAA5251 REV NO: V.13A DATE: APR/13/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203001552 Downloaded from Arrow.com. Selection Guide Part No. Dice KPJA-2107SURCK Lens Type Hyper Red (AlGaInP) Water Clear Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 120 220 *40 *80 2θ1/2 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. * Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Red 645 λD [1] Dominant Wavelength Hyper Red 630 Δλ1/2 Spectral Line Half-width Hyper Red 28 C Capacitance Hyper Red 35 VF [2] Forward Voltage Hyper Red IR Reverse Current Hyper Red t h Max. Units Test Conditions nm IF=20mA nm IF=20mA nm IF=20mA pF VF=0V;f=1MHz 2.5 V IF=20mA 10 uA VR=5V g i r b g in 1.95 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. K Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAA5251 REV NO: V.13A DATE: APR/13/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203001552 Downloaded from Arrow.com. Hyper Red KPJA-2107SURCK t h g i r b g n i K SPEC NO: DSAA5251 REV NO: V.13A DATE: APR/13/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203001552 Downloaded from Arrow.com. KPJA-2107SURCK Reflow soldering is recommended and the soldering profile is shown below. Other soldering methods are not recommended as they might cause damage to the product. Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Dimensions (Units : mm) K g in g i r b t h Reel Dimension SPEC NO: DSAA5251 REV NO: V.13A DATE: APR/13/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203001552 Downloaded from Arrow.com. PACKING & LABEL SPECIFICATIONS KPJA-2107SURCK t h g i r b g in K Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAA5251 REV NO: V.13A DATE: APR/13/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1203001552 Downloaded from Arrow.com.