KPK-3020SURC

3.0x2.0mm SMD CHIP LED LAMP KPK-3020SURC HYPER RED Features !3.0mmX2.0mm SMT LED, 1.3mm THICKNESS. !LOW POWER CONSUMPTION. !WIDE VIEWING ANGLE. !IDEAL Description The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. ! VARIOUS !PACKAGE:2000PCS/REEL Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA9196 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: DEC/16/2002 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide P ar t N o . Dic e L en s Ty p e Iv (m c d ) @ 20 m A Min . KPK-3020SURC HYPER RED ( InGaAIP) WATER CLEAR 70 Ty p . 230 V i ew i n g An g l e 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Sy m b o l λpeak λD ∆λ1/2 C VF IR P ar am et er Peak Wavelength Dominate Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current D ev i c e Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Hyper Red Ty p . 640 628 27 45 1.9 2.5 10 Max . Un its nm nm nm pF V uA Tes t Co n d it io n s I F =20mA I F =20mA I F =20mA VF =0V;f=1MHz I F =20mA V R = 5V Absolute Maximum Ratings at TA=25°C P ar am et er Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. H y p er R ed 170 30 185 5 -40°C To +85°C Un its mW mA mA V SPEC NO: DSAA9196 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: DEC/16/2002 DRAWN:S.J.HOU PAGE: 2 OF 4 Hyper Red KPK-3020SURC SPEC NO: DSAA9196 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: DEC/16/2002 DRAWN:S.J.HOU PAGE: 3 OF 4 KPK-3020SURC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA9196 APPROVED : J. Lu REV NO: V.2 CHECKED :Allen Liu DATE: DEC/16/2002 DRAWN:S.J.HOU PAGE: 4 OF 4