KPSA04-104

SURFACE MOUNT DISPLAY P/N: KPSA04-104 SUPER BRIGHT RED Features 0.4INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE: 400PCS/REEL. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ± 0 .25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. S PEC NO: DSAA6030 APPROVED: J. Lu REV NO: V.5 CHECKED: Joe Lee DATE: NOV/21/2005 DRAWN: W.J.ZHU PAGE: 1 OF 4 Selection Guide Part No. Dice Lens Type Iv (ucd) @ 10 mA Min. KPSA04-104 SUPER BRIGHT RED (GaAlAs) WHITE DIFFUSED 8000 Typ. 27500 Common Anode, Rt. Hand Decimal. Description Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 100 30 155 5 -40°C To +85°C Units mW mA mA V S PEC NO: DSAA6030 APPROVED: J. Lu REV NO: V.5 CHECKED: Joe Lee DATE: NOV/21/2005 DRAWN: W.J.ZHU PAGE: 2 OF 4 Super Bright Red KPSA04-104 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity/ Luminous Flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. S PEC NO: DSAA6030 APPROVED: J. Lu REV NO: V.5 CHECKED: Joe Lee DATE: NOV/21/2005 DRAWN: W.J.ZHU PAGE: 3 OF 4 KPSA04-104 Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) S PEC NO: DSAA6030 APPROVED: J. Lu REV NO: V.5 CHECKED: Joe Lee DATE: NOV/21/2005 DRAWN: W.J.ZHU PAGE: 4 OF 4