1.6X0.8mm SMD CHIP LED LAMP
Part Number: KPT-1608SECK
Super Bright Orange
Features
Description
1.6mmX0.8mm SMD LED, 0.75mm thickness.
The Super Bright Orange device is made with AlGaInP (on
Low power consumption.
GaAs substrate) light emitting diode chip.
Wide viewing angle.
Ideal for backlight and indicator.
Package: 2000pcs / reel .
Moisture sensitivity level : level 3.
RoHS compliant.
Package Dimensions
K
g
in
ig
r
b
t
h
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB1874
REV NO: V.22A
DATE: MAY/19/2016
PAGE: 1 OF 5
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.T.Zhang
ERP: 1203001727
Selection Guide
Part No.
Emitting Color (Material)
Lens Type
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Super Bright Orange (AlGaInP)
120
Water Clear
250
*80
KPT-1608SECK
Typ.
2θ1/2
*180
120°
Notes:
1. θ1 / 2 is the angle from optical centerline where the luminous intensity is 1 / 2 of the optical peak value.
2. Luminous intensity / luminous Flux: + / -15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
λpeak
Peak Wavelength
Super Bright Orange
610
λD [1]
Dominant Wavelength
Super Bright Orange
601
Δλ1/2
Spectral Line Half-width
Super Bright Orange
29
C
Capacitance
Super Bright Orange
15
t
h
VF [2]
Forward Voltage
2.1
IR
Reverse Current
Max.
ig
r
b
g
in
Super Bright Orange
Super Bright Orange
Units
Test Conditions
nm
IF=20mA
nm
IF=20mA
nm
IF=20mA
pF
VF=0V;f=1MHz
2.5
V
IF=20mA
10
uA
VR=5V
Notes:
1. Wavelength: + / -1nm.
2. Forward Voltage: + / -0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
K
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
195
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref
JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAB1874
REV NO: V.22A
DATE: MAY/19/2016
PAGE: 2 OF 5
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.T.Zhang
ERP: 1203001727
Super Bright Orange
KPT-1608SECK
t
h
ig
r
b
g
in
K
SPEC NO: DSAB1874
REV NO: V.22A
DATE: MAY/19/2016
PAGE: 3 OF 5
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.T.Zhang
ERP: 1203001727
KPT-1608SECK
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
K
g
in
ig
r
b
t
h
Reel Dimension
SPEC NO: DSAB1874
REV NO: V.22A
DATE: MAY/19/2016
PAGE: 4 OF 5
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.T.Zhang
ERP: 1203001727
PACKING & LABEL SPECIFICATIONS
KPT-1608SECK
t
h
ig
r
b
g
in
K
Terms and conditions for the usage of this document
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without
notice. Before production usage customer should refer to the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental
and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible
for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has
special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with
Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at http://www.kingbright.com/application_notes
SPEC NO: DSAB1874
REV NO: V.22A
DATE: MAY/19/2016
PAGE: 5 OF 5
APPROVED: Wynec
CHECKED: Allen Liu
DRAWN: L.T.Zhang
ERP: 1203001727
很抱歉,暂时无法提供与“KPT-1608SECK”相匹配的价格&库存,您可以联系我们找货
免费人工找货