KPT-3216SRC-PRV

3.2mm x 1.6mm SMD CHIP LED LAMP KPT-3216SRC-PRV SUPER BRIGHT RED Features !3.2mmx1.6mm !LOW Description SMT LED, 0.75mm THICKNESS. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. POWER CONSUMPTION. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. COLORS AND LENS TYPES AVAILABLE. : 2000PCS / REEL. !WIDE !IDEAL !VARIOUS !PACKAGE Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 1 OF 4 Selection Guide Iv (m c d ) @ 20 m A Min . KPT-3216SRC-PRV SUPER BRIGHT RED (GaA|As ) WATER CLEAR 36 Ty p . 80 V i ew i n g An g l e 2θ1/2 120° P ar t N o . Dic e L en s Ty p e Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Sy m b o l λpeak λD ∆λ1/2 C P ar am et er Peak Wavelength D ev i c e Super Bright Red Ty p . 660 Max . Un its nm Tes t Co n d it io n s I F =20mA Dominate Wavelength Super Bright Red 640 nm I F =20mA Spectral Line Half-width Super Bright Red 20 nm I F =20mA Capacitance Super Bright Red 45 pF V F =0V;f=1MHz VF IR Forward Voltage Reverse Current Super Bright Red Super Bright Red 1.85 2.5 10 V uA I F =20mA V R = 5V Absolute Maximum Ratings at TA=25°C P ar am et er Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating Temperature Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. S u p er B r i g h t R ed 100 30 155 5 -40°C To +85°C -40°C To +85°C Un its mW mA mA V SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 2 OF 4 Super Bright Red KPT-3216SRC-PRV SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 3 OF 4 KPT-3216SRC-PRV SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAA4462 APPROVED: J.Lu REV NO: V.3 CHECKED:Allen Liu DATE: FEB/09/2003 DRAWN:S.J.HOU PAGE: 4 OF 4