KPTF-3216PBVGSURKC

3.2mm x 1.6mm FULL-COLOR SURFACE MOUNT LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES KPTF-3216PBVGSURKC BLUE GREEN HYPER RED PRELIMINARY SPEC Features 3.2mmx1.6mm SMT LED, 0.75mm THICKNESS. LOW POWER CONSUMPTION. ONE BLUE, ONE GREEN AND ONE RED CHIPS IN ONE PACKAGE. CAN PRODUCE ANY COLOR IN VISIBLE SPECTRUM, INCLUDING WHITE LIGHT. PACKAGE : 2000PCS / REEL. RoHS COMPLIANT Description The Blue source color devices are made with InGaN on SiC Light Emitting Diode. The Green source color devices are made with InGaN on SiC Light Emitting Diode. The Hyper Red source color devices are made with DH InGaAlP on GaAs substrate Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subjected to change without notice. SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 1 OF 6 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. BLUE (InGaN) KPTF-3216PBVGSURKC GREEN (InGaN) HYPER RED (InGaAIP) Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Viewing Angle 2θ1/2 120° Typ. 100 150 150 50 WATER CLEAR 70 70 Electrical / Optical Characteristics at TA=25°C Symbol λpeak Parameter Device Blue Green Hyper Red Blue Green Hyper Red Blue Green Hyper Red Blue Green Hyper Red Blue Green Hyper Red Blue Green Hyper Red Typ. 468 520 650 470 525 635 25 38 28 65 45 35 3.65 3.5 1.95 4.2 4.5 2.5 10 10 10 Max. Units Test Conditions Peak Wavelength nm IF=20mA λD Dominant Wavelength nm IF=20mA ∆λ1/2 Spectral Line Half-width nm IF=20mA C Capacitance pF VF=0V;f=1MHz VF Forward Voltage V IF=20mA IR Reverse Current uA VR= 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Blue 102 30 160 Green 105 30 150 5 -40°C TO +85°C Hyper Red 170 30 185 Units mW mA mA V SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 2 OF 6 KPTF-3216PBVGSURKC Blue SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 3 OF 6 Green SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 4 OF 6 Hyper Red SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 5 OF 6 KPTF-3216PBVGSURKC RecommendedSoldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD0242 APPROVED: J. Lu REV NO: V.5 CHECKED: Allen Liu DATE: OCT/18/2005 DRAWN: Y.L.LI PAGE: 6 OF 6