L-1503CB

Kingbright Features lPRE-TRIMMED ® T-1 3/4 (5mm) RIGHT ANGLE LED INDICATORS L-1503CB/1I HIGH EFFICIENCY RED L-1503CB/1G GREEN L-1503CB/1Y YELLOW L-1503CB/1SR SUPER BRIHGT RED Package Dimensions LEADS FOR PC BOARD MOUNTING. lI.C. COMPATIBLE. lBLACK CASE ENHANCES CONTRAST RATIO. lWIDE VIEWING ANGLE. lHIGH RELIABILITY - LIFE MEASURED IN YEARS. Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Selection Guide Part No. Dice Lens Type Iv (mcd) @ 10 mA Min. L-1503CB/1ID L-1503CB/1GD L-1503CB/1YD HIGH EFFICIENCY RED (GaAsP/GaP) GREEN (GaP) YELLOW (GaAsP/GaP) RED DIFFUSED GREEN DIFFUSED YELLOW DIFFUSED 12.5 5 5 Viewing Angle 2θ1/2 60° 60° 60° Max. 80 32 32 L-1503CB/1SRD SUPER BRIGHT RED (GaAlAs) RED DIFFUSED *100 *500 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. *Luminous intensity with asterisk is measured at 20 mA. 3-L1503CB-1 Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device High Efficiency Red Green Yellow Super Bright Red High Efficiency Red Green Yellow Super Bright Red High Efficiency Red Green Yellow Super Bright Red High Efficiency Red Green Yellow Super Bright Red All Typ. 625 565 590 660 45 30 35 20 12 45 10 95 2.0 2.2 2.1 1.85 10 Max. Units Test Conditions λpeak Peak Wavelength nm IF=20mA ∆λ1/2 Spectral Line Halfwidth nm IF=20mA C Capacitance pF VF=0V;f=1MHz vF IR Forward Voltage 2.5 2.5 2.5 2.5 V IF=20mA Reverse Current uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Soldering Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 4mm below package base. High Efficiency Red 105 30 150 5 Green 105 25 150 5 Yellow 105 30 150 5 -40 °C To +85 °C Super Bright Red Units 100 30 150 5 mW mA mA V 260 °C For 5 Seconds 3-L1503CB-2 High Efficiency Red L-1503CB/1ID Green L-1503CB/1GD 3-L1503CB-3 Yellow L-1503CB/1YD Super Bright Red L-1503CB/1SRD 3-L1503CB-4