PSA12-11EWA

30.48mm(1.2 INCH) 16 SEGMENT SINGLE DIGIT ALPHANUMERIC NUMERIC DISPLAY Part Number: PSA12-11EWA HIGH EFFICIENCY RED Features 1.2 INCH CHARACTER HEIGHT . LOW CURRENT OPERATION. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. STANDARD:GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. S PEC NO: DSAD2403 APPROVED: WYNEC REV NO: V.8 CHECKED: Joe Lee DATE: MAY/31/2007 DRAWN: Z.Z.YANG PAGE: 1 OF 5 ERP: 1311000051 Selection Guide Iv (ucd) [1] @ 10mA Min. PSA12-11EWA HIGH EFFICIENCY RED(GaAsP/GaP) WHITE DIFFUSED 3000 Typ. 12000 Common Anode, Rt. Hand Decimal Part No. Dice Lens Type Description Note: 1. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD[1] ∆λ1/2 C VF[2] Forward Voltage Reverse Current Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance c,d,g,h,k,m,n,s,r,t High Efficiency Red a,b,e,f,p,u and DP c,d,g,h,k,m,n,s,r,t High Efficiency Red a,b,e,f,p,u and DP 10 2.0 2.5 10 uA VR = 10V VR = 5V Device High Efficiency Red High Efficiency Red High Efficiency Red High Efficiency Red Typ. 627 625 45 15 4.0 5.0 V IF=20mA Max. Units nm nm nm pF Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IR Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter c,d,g,h,k,m,n,s,r,t Power dissipation a,b,e,f,p,u and DP c,d,g,h,k,m,n,s,r,t DC Forward Current a,b,e,f,p,u and DP Peak Forward Current [1] Reverse Voltage a,b,e,f,p,u and DP Operating/Storage Temperature Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. High Efficiency Red 150 75 30 30 160 160 10 5 -40°C To +85°C 260°C For 3-5 Seconds Units mW mA c,d,g,h,k,m,n,s,r,t a,b,e,f,p,u and DP c,d,g,h,k,m,n,s,r,t mA V S PEC NO: DSAD2403 APPROVED: WYNEC REV NO: V.8 CHECKED: Joe Lee DATE: MAY/31/2007 DRAWN: Z.Z.YANG PAGE: 2 OF 5 ERP: 1311000051 High Efficiency Red PSA12-11EWA Note:the curves are on the segment a,b,e,f,p,u and DP. S PEC NO: DSAD2403 APPROVED: WYNEC REV NO: V.8 CHECKED: Joe Lee DATE: MAY/31/2007 DRAWN: Z.Z.YANG PAGE: 3 OF 5 ERP: 1311000051 Note:the curves are on the segment c,d,g,h,k,m,n,s,r and t. S PEC NO: DSAD2403 APPROVED: WYNEC REV NO: V.8 CHECKED: Joe Lee DATE: MAY/31/2007 DRAWN: Z.Z.YANG PAGE: 4 OF 5 ERP: 1311000051 PACKING & LABEL SPECIFICATIONS PSA12-11EWA S PEC NO: DSAD2403 APPROVED: WYNEC REV NO: V.8 CHECKED: Joe Lee DATE: MAY/31/2007 DRAWN: Z.Z.YANG PAGE: 5 OF 5 ERP: 1311000051