SBC18-11EGWA

44.5mm (1.75INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SBC18-11EGWA High Efficiency Red Green Features ●1.75 INCH DIGIT HEIGHT. ●LOW CURRENT OPERATION. ●EXCELLENT CHARACTER APPEARANCE. ●HIGH LIGHT OUTPUT. ●EASY MOUNTING ON P.C. BOARDS OR SOCKETS. ●I.C. COMPATIBLE. ●MULTICOLOR AVAILABLE. ●MECHANICALLY RUGGED. ●STANDARD : GRAY FACE, WHITE SEGMENT. ●RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1301000675 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. SBC18-11EGWA High Efficiency Red (GaAsP/GaP) Green (GaP) Note: 1. Luminous intensity/ luminous Flux: +/-15%. Description Typ. 24000 12000 Common Cathode, Rt. Hand Decimal. WHITE DIFFUSED 4700 3000 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Per Segment Or (DP) Reverse Current Per Segment Or (DP) Device High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green Typ. 627 565 625 568 45 30 15 15 6.0 (2.0) 6.6 (2.2) 7.5 (2.5) 7.5 (2.5) 10 (10) Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=15V (VR=5V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Per Segment Or (DP) DC Forward Current Per Segment Or (DP) Peak Forward Current [1] Per Segment Or (DP) Reverse Voltage Per Segment Or (DP) Operating/Storage Temperature Lead Solder Temperature [2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. High Efficiency Red 225 (75) 30 (30) 160 (160) 15 (5) -40°C To +85°C Green 187.5 (62.5) 25 (25) 140 (140) Units mW mA mA V 260°C For 3-5 Seconds SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1301000675 SBC18-11EGWA High Efficiency Red SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1301000675 SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1301000675 Green SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1301000675 SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1301000675 PACKING & LABEL SPECIFICATIONS SBC18-11EGWA SPEC NO: DSAD2320 APPROVED: WYNEC REV NO: V.6 CHECKED: Joe Lee DATE: MAY/24/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1301000675