SC40-18GWA

100mm (4.0INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC40-18GWA Green Features LARGE SIZE. 4.0 INCH DIGIT HEIGHT. LOW CURRENT OPERATION. EXCELLENT CHARACTER APPEARANCE. HIGH LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. I.C. COMPATIBLE. MECHANICALLY RUGGED. STANDARD : GRAY FACE, WHITE SEGMENT. RoHS COMPLIANT. Description The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAD2344 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/04/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1301000967 Selection Guide Part No. Dice Lens Type Iv (ucd) [1] @ 10mA Min. SC40-18GWA Green (GaP) WHITE DIFFUSED 12000 Typ. 60000 Common Cathode, Rt. Hand Decimal. Description Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Per Segment Or (DP) Reverse Current Per Segment Or (DP) Device Green Green Green Green Green Green Typ. 565 568 30 15 8.8 (4.4) 10.0 (5.0) 10 (10) Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR=20V (VR=10V) Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Per Segment Or (DP) DC Forward Current Per Segment Or (DP) Peak Forward Current [1] Per Segment Or (DP) Reverse Voltage Per Segment Or (DP) Operating / Storage Temperature Lead Solder Temperature[2] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. Green 500 (125) 50 (25) 280 (140) 20 (10) -40°C To +85°C 260°C For 3-5 Seconds Units mW mA mA V SPEC NO: DSAD2344 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/04/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1301000967 Green SC40-18GWA SPEC NO: DSAD2344 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/04/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1301000967 SPEC NO: DSAD2344 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/04/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1301000967 PACKING & LABEL SPECIFICATIONS SC40-18GWA SPEC NO: DSAD2344 APPROVED: WYNEC REV NO: V.7 CHECKED: Joe Lee DATE: JUN/04/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1301000967