SC56-21SYKWA

14.2mm (0.56INCH) SINGLE DIGIT NUMERIC DISPLAY Part Number: SC56-21SYKWA Super Bright Yellow Features Description z 0.56 inch digit height. The Super Bright Yellow device is made with AlGaInP (on z Low current operation. GaAs substrate) light emitting diode chip. z Excellent character appearance. z Easy mounting on P.C. boards or sockets. z Mechanically rugged. z Standard : gray face, white segment. z RoHS compliant. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653 Selection Guide Part No. Dice SC56-21SYKWA Iv (ucd) [1] @ 10mA Lens Type Super Bright Yellow (AlGaInP) Min. Typ. 52000 160000 *21000 *48000 White Diffused Description Common Cathode, Rt.Hand Decimal. Notes: 1. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Yellow λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 590 nm IF=20mA Super Bright Yellow 590 nm IF=20mA Spectral Line Half-width Super Bright Yellow 20 nm IF=20mA C Capacitance Super Bright Yellow 20 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Yellow 2.0 2.5 V IF=20mA IR Reverse Current Super Bright Yellow 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Yellow Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 175 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653 Super Bright Yellow SC56-21SYKWA SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653 PACKING & LABEL SPECIFICATIONS SC56-21SYKWA SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653 SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653 All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes SPEC NO: DSAM8432 REV NO: V.1A DATE: JAN/26/2013 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1301002653