WP130WCP-2EGW

T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: WP130WCP/2EGW High Efficiency Red Green Features BI-LEVEL RIGHT ANGLE HOUSING LED. PRE-TRIMMED LEADS FOR PC BOARD MOUNTING. I.C. COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. HIGH RELIABILITY. UL RATING: 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. RoHS COMPLIANT. Description The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAE9307 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1102000158 Selection Guide Part No. Dice Lens Type Iv (mcd) [2] @ 20mA Min. High Efficiency Red (GaAsP/GaP) WP130WCP/2EGW Green (GaP) Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Viewing Angle [1] 2θ1/2 60 ° Typ. 30 25 7 WHITE DIFFUSED 7 Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD [1] Δλ1/2 C VF [2] IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green High Efficiency Red Green Typ. 627 565 625 568 45 30 15 15 2 2.2 2.5 2.5 10 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA V R = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating / Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. High Efficiency Red 75 30 160 5 Green 62.5 25 140 Units mW mA mA V -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds SPEC NO: DSAE9307 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1102000158 WP130WCP/2EGW High Efficiency Red SPEC NO: DSAE9307 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1102000158 Green SPEC NO: DSAE9307 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1102000158 PACKING & LABEL SPECIFICATIONS WP130WCP/2EGW SPEC NO: DSAE9307 APPROVED: WYNEC REV NO: V.3 CHECKED: Allen Liu DATE: MAY/21/2007 DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1102000158