WP138A8QMP-SRD-TG

3.4mm RIGHT ANGLE LED INDICATOR WP138A8QMP/SRD/TG SUPER BRIGHT RED Features PRE-TRIMMED LEADS FOR PC MOUNTING. CAN BE ASSEMBLED WITH EACH OTHER. I.C.COMPATIBLE. BLACK CASE ENHANCES CONTRAST RATIO. WIDE VIEWING ANGLE. HIGH RELIABILITY LIFE MEASURED IN YEARS. HOUSING MATERIAL:PPA. PACKAGE:1000PCS / REEL. HIGH TEMPERATURE RESISTANT HOUSING. H IGH GLASS TRANSITION TEMPERATURE EPOXY. RoHS COMPLIANT. Description The Super Bright Red source color devices are made with Gallium Aluminum Arsenide Red Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAF7181 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: AUG/30/2005 DRAWN: Y.W.WANG PAGE: 1 OF 5 ERP: 1102000502 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20 mA Min. WP138A8QMP/SRD/TG SUPER BRIGHT RED (GaAlAs) RED DIFFUSED 110 Typ. 250 Viewing Angle 2θ1/2 60° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Super Bright Red Typ. 660 640 20 45 1.85 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Super Bright Red 100 30 155 5 -40°C To +85°C Units mW mA mA V SPEC NO: DSAF7181 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: AUG/30/2005 DRAWN: Y.W.WANG PAGE: 2 OF 5 ERP: 1102000502 Super Bright Red WP138A8QMP/SRD/TG SPEC NO: DSAF7181 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: AUG/30/2005 DRAWN: Y.W.WANG PAGE: 3 OF 5 ERP: 1102000502 WP138A8QMP/SRD/TG Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: DSAF7181 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: AUG/30/2005 DRAWN: Y.W.WANG PAGE: 4 OF 5 ERP: 1102000502 PACKING & LABEL SPECIFICATIONS WP138A8QMP/SRD/TG WP138A8QMP/xxx Remarks: If special sorting is required (e.g. binning based on forward voltage, Luminous intensity/ luminous flux, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous intensity/ luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF7181 APPROVED: J. Lu REV NO: V.1 CHECKED: Allen Liu DATE: AUG/30/2005 DRAWN: Y.W.WANG PAGE: 5 OF 5 ERP: 1102000502