WP1504CB-RWC-A

T-1 3/4 (5mm) RIGHT ANGLE LED INDICATOR PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: WP1504CB/RWC/A White Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Features LOW POWER CONSUMPTION. VERSATILE MOUNTING ON P.C. BOARD OR PANEL. T-1 3/4 DIAMETER FLANGELESS PACKAGE. RELIABLE AND RUGGED. UL RATING : 94V-0. HOUSING MATERIAL: TYPE 66 NYLON. MOISTURE SENSITIVITY LEVEL : LEVEL 1. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K. COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY: 7.0 lm/W(TYP.) COLOR REPRODUCTION INDEX:80. RoHS COMPLIANT. Applications Furniture lighting Outdoor displays Optical indicators Signal and symbol luminaire Marker lights (e.g. steps, exit ways, etc.) Lighting for special effects (e.g. starry sky) Substitute for miniature flashlight Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 1 OF 7 ERP: 1102009847 S election Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. WP1504CB/RWC/A WHITE (InGaN) WATER CLEAR 480 Typ. 850 Note2 Φv (mlm) @ 20 mA Typ. 450 Note3 Viewing Note1 Angle 2 θ 1/2 20 ° Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Value 120 5 110 -40 To +85 -40 To +100 30 100 350 Unit mW V °C °C °C mA mA °C/W N otes: 1 .θ 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 p er pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 / ° C 10-3 / ° C mV/ ° C Temperature coefficient of x IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] Temperature coefficient of y IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] Temperature coefficient of VF IF=20mA, -10 ° C≤ T≤100 ° C [Typ.] VF Note2 Symbol X Y Note1 Value 0.31 0.31 2.7 3.2 4.0 0.01 Unit - Note1 V Reverse Current (VR=5V) μA TCy -0.2 TCV -2.5 Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.02 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 2 OF 7 ERP: 1102009847 Brightness codes luminous Intensity Iv(mcd) @ 20mA Code. S T U V W X Y Z ZA ZB Min. 480 650 900 1200 1500 1800 2200 2500 2800 3300 Note1 Φv (mlm) @ 20mA Max. 750 1100 1500 1800 2100 2500 3000 3300 3800 4500 Typ. 300 400 500 600 700 900 1100 1300 1500 1700 Note2 N otes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White WP1504CB/RWC/A SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 3 OF 7 ERP: 1102009847 WP1504CB/RWC/A SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 4 OF 7 ERP: 1102009847 WP1504CB/RWC/A White CIE 0.44 0.43 0.42 0.41 0.40 0.39 0.38 0.37 0.36 0.35 0.34 0.33 0.32 0.31 0.30 0.29 0.28 0.27 0.26 0.25 0.24 0.23 0.22 0.21 0.22 0.23 0.24 0.25 0.26 0.27 0.28 0.29 0.30 0.31 0.32 0.33 0.34 0.35 0.36 0.37 0.38 c1 b4 c0 b3 b1 b2 a1 a0 a0 X Y 0.264 0.283 0.296 0.267 0.305 0.276 0.280 0.248 X Y a1 0.248 0.275 0.283 0.286 0.321 0.305 0.264 0.267 X Y b1 0.283 0.330 0.330 0.305 0.360 0.339 0.287 0.295 Reference CCT: 14000~9000k Reference CCT: 14000~9000k Reference CCT: 9000~5600k b2 X Y 0.287 0.330 0.330 0.295 0.339 0.318 0.296 0.276 X Y b3 0.275 0.298 0.306 0.321 0.350 0.332 0.283 0.305 X Y b4 0.298 0.321 0.330 0.350 0.379 0.360 0.306 0.332 Reference CCT: 9000~5600k Reference CCT: 9000~7000k Reference CCT: 7600~5600k c0 X Y 0.330 0.361 0.356 0.360 0.385 0.351 0.330 0.318 X Y c1 0.321 0.366 0.361 0.379 0.419 0.385 0.330 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 5 OF 7 ERP: 1102009847 WP1504CB/RWC/A Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 6 OF 7 ERP: 1102009847 PACKING & LABEL SPECIFICATIONS WP1504CB/RWC/A asses sor SPEC NO: DSAH7946 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu 數位簽署者：assessor DN：cn=assessor, o, ou, email=assessor@cn. kingbright.com, c= 日期︰2007.10.05 07:40:44 +08'00' DATE: SEP/28/2007 DRAWN: C.WANG PAGE: 7 OF 7 ERP: 1102009847